Frictional Games Forum (read-only)

I have a door in the level editor that's at the top of the stairs it's an arched door with arched doorway and frame and when I go to test it in the game it won't move. You can hear the door clicking sound when i grab it and it moves slightly but it won't open. I don't know what the problem is I've checked multiple times that the door isn't over lapping anything or that it's up too high or too low or too far forward or backwards. I've tried turning it around also and nothing is working.

What is the position? Y, X, And Z. Or the door could be stuck.

Your door is probably just in the wrong position. Take a look at these images and make your door look identical because I know that this door works:




The frame and the door have the same coordinates, except the -0.25 difference in the Z-axis.

Thanks for replying it's still not working.. the coordinates of the door are:

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16 and It's still not working and the door looks exactly as the picture. There is nothing on either side of the door to block it. The floors y axis is 0 so it can't be blocking the door. Do you know what else could be blocking it?

---

(02-03-2013, 03:01 AM)JustAnotherPlayer Wrote: [ -> ]What is the position? Y, X, And Z. Or the door could be stuck.

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16

(02-03-2013, 03:34 AM)megsb927 Wrote: [ -> ]Thanks for replying it's still not working.. the coordinates of the door are:

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16 and It's still not working and the door looks exactly as the picture. There is nothing on either side of the door to block it. The floors y axis is 0 so it can't be blocking the door. Do you know what else could be blocking it?

---

(02-03-2013, 03:01 AM)JustAnotherPlayer Wrote: [ -> ]What is the position? Y, X, And Z. Or the door could be stuck.

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16

Give me your .map file. And both of our question are the same.

(02-03-2013, 03:39 AM)JustAnotherPlayer Wrote: [ -> ]

(02-03-2013, 03:34 AM)megsb927 Wrote: [ -> ]Thanks for replying it's still not working.. the coordinates of the door are:

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16 and It's still not working and the door looks exactly as the picture. There is nothing on either side of the door to block it. The floors y axis is 0 so it can't be blocking the door. Do you know what else could be blocking it?

---

(02-03-2013, 03:01 AM)JustAnotherPlayer Wrote: [ -> ]What is the position? Y, X, And Z. Or the door could be stuck.

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16

Give me your .map file. And both of our question are the same.

How do I send you my .map file?**

(02-03-2013, 03:43 AM)megsb927 Wrote: [ -> ]

(02-03-2013, 03:39 AM)JustAnotherPlayer Wrote: [ -> ]

(02-03-2013, 03:34 AM)megsb927 Wrote: [ -> ]Thanks for replying it's still not working.. the coordinates of the door are:

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16 and It's still not working and the door looks exactly as the picture. There is nothing on either side of the door to block it. The floors y axis is 0 so it can't be blocking the door. Do you know what else could be blocking it?

---

(02-03-2013, 03:01 AM)JustAnotherPlayer Wrote: [ -> ]What is the position? Y, X, And Z. Or the door could be stuck.

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16

Give me your .map file. And both of our question are the same.

How do I send you my .map file?**

When you are building your map, Save it and name it whatever you want. And upload it to mediafire then give the link to me. Simple.

(02-03-2013, 05:57 AM)JustAnotherPlayer Wrote: [ -> ]

(02-03-2013, 03:43 AM)megsb927 Wrote: [ -> ]

(02-03-2013, 03:39 AM)JustAnotherPlayer Wrote: [ -> ]

(02-03-2013, 03:34 AM)megsb927 Wrote: [ -> ]Thanks for replying it's still not working.. the coordinates of the door are:

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16 and It's still not working and the door looks exactly as the picture. There is nothing on either side of the door to block it. The floors y axis is 0 so it can't be blocking the door. Do you know what else could be blocking it?

---

(02-03-2013, 03:01 AM)JustAnotherPlayer Wrote: [ -> ]What is the position? Y, X, And Z. Or the door could be stuck.

x: -6

y: 4

z: 15.75 and the coordinates of the door frame are:

x:-6

y:4

z:16

Give me your .map file. And both of our question are the same.

How do I send you my .map file?**

When you are building your map, Save it and name it whatever you want. And upload it to mediafire then give the link to me. Simple.

http://www.mediafire.com/?81q1y76754cv3iq this is the link to my map
it's the door at the top of the stairs

It is probably just because the door is stuck in the doorframe. You will have to turn off grid snapping (the magnet at the bottom) and move the door carefully so that it doesn't overlap with the frame anymore. Most of the doors, when placed in the map, are too low or too high to actually fit in the frame.