i made an outside place...
with some Street floors..
but the same sound is coming ?! i'm walking on the Street (cobblestone Ground) and the sounds is more... planks.. like in the mansion.. all other cobblestone and outside paths have the same sounds ?! except the orginal but they are ugly.. i want stone
can someone help me ?
This is way too difficult to explane..
You will need to open the.mat file for the plane you use,
Then you need to open your materials.cfg And copy\paste for example this :
PHP Code:
<Materials>
<Material
Name = "Concrete"
Elasticity = "0.1"
KineticFriction = "0.35"
StaticFriction = "0.35"
Priority="0"
ElasticityMode = "Average"
FrictionMode = "Average"
StepType="tarmac"
MinScrapeSpeed = "1"
MinScrapeFreq = "0.9"
MinScrapeFreqSpeed = "1.2"
MaxScrapeFreq = "1.1"
MaxScrapeFreqSpeed = "2.2"
MiddleScrapeSpeed = "2"
MinScrapeContacts = "3"
ScrapeSoundName = "step_Walk_Tarmac"
>
<Impact MinSpeed="2" SoundName="wettarmac_1"/>
<Impact MinSpeed="2" SoundName="wettarmac_2"/>
<Impact MinSpeed="2" SoundName="wettarmac_4"/>
<Impact MinSpeed="2" SoundName="wettarmac_5"/>
<Impact MinSpeed="2" SoundName="wettarmac_7"/>
<Impact MinSpeed="2" SoundName="wettarmac_8"/>
<Impact MinSpeed="2" SoundName="wettarmac_9"/>
<Impact MinSpeed="2" SoundName="wettarmac_10"/>
<Hit MinSpeed="3" SoundName="" PSName="ps_hit_hard" PSPrio="10" />
<Hit MinSpeed="1" SoundName="" PSName="ps_hit_hard" PSPrio="10" />
</Material>
Then...
Change this name -> Name = "Concrete" into whatever Name = "MyNewConcrete" or whatever you want,
Then the Name = "MyNewConcrete" need to be replaced into the .mat file your plane uses..
ALso there are 8 defferent stepsounds in the example above.
SO <Impact MinSpeed="2" SoundName="wettarmac_1"/>
Need be changed as well (wettarmac_1) <-- Is the soundfile in your mod\folder.
---
As i said, VERY hard... THis is NOT for beginners.
If you want to try, try like mine, and COPY THE ORIGINAL FILES as backup.
Good luck.
thankss! and WOW
just great :S
i will try
i did everything!!!
but the only thing had happened.. i got an error... first i can see the map for only 0.6 seconds then the error appear
For future reference, remember to show us the error, and what you've changed ^_^
You should do that now.
ow... xD sometimes... i'm...weird :S
i placed this :
PHP Code:
<Material
Name = "Concrete"
Elasticity = "0.1"
KineticFriction = "0.35"
StaticFriction = "0.35"
Priority="0"
ElasticityMode = "Average"
FrictionMode = "Average"
StepType="tarmac"
MinScrapeSpeed = "1"
MinScrapeFreq = "0.9"
MinScrapeFreqSpeed = "1.2"
MaxScrapeFreq = "1.1"
MaxScrapeFreqSpeed = "2.2"
MiddleScrapeSpeed = "2"
MinScrapeContacts = "3"
ScrapeSoundName = "step_Walk_Tarmac"
>
<Impact MinSpeed="2" SoundName="wettarmac_1"/>
<Impact MinSpeed="2" SoundName="wettarmac_2"/>
<Impact MinSpeed="2" SoundName="wettarmac_4"/>
<Impact MinSpeed="2" SoundName="wettarmac_5"/>
<Impact MinSpeed="2" SoundName="wettarmac_7"/>
<Impact MinSpeed="2" SoundName="wettarmac_8"/>
<Impact MinSpeed="2" SoundName="wettarmac_9"/>
<Impact MinSpeed="2" SoundName="wettarmac_10"/>
<Hit MinSpeed="3" SoundName="" PSName="ps_hit_hard" PSPrio="10" />
<Hit MinSpeed="1" SoundName="" PSName="ps_hit_hard" PSPrio="10" />
</Material>
in my Mat.cfg file
and changed it to : MyNewConcrete
then ( i didn't knew what to do )
i saved The Plane (in .MAT editor131111) *Save AS* and named it
MyNewConcrete.mat
i used that plane and amnesia just crashed
Voilation or something like that..
Name = "Concrete"
Must be MyNewConcrete right..
And Copy AND paste..
Send you error please.
yes i copied this one from you're post but yes it was already MyNewConcrete and error is
Exception reason : amnesiatestblabla caused Exception_acces_violation in module
amnesiatestblabla..
??